Surface Mount Switch Kit
Surface Mount Switch Kit
In stock
Meet the Surface Mount Switch, an enclosed wireless switch with push-button operation. This kit offers an easy, non-invasive way to add a switch to your room. Simply install the receiver and mount the switch wherever it suits you best. With a faceplate design familiar across Australia and New Zealand, the Surface Mount Switch blends seamlessly into the aesthetics of modern homes.
Quick Specs
Receiver supply |
100-240VAC 50Hz |
Maximum load | 500W |
Receiver dimensions | 73mm x 43mm x 26mm |
Switch dimensions | 120mm x 78mm x 10mm |
Wireless range | 15 meters (2.4GHz) |
Battery life | 6-7 years (CR2032) |
Inside the box, you will find:
- Wireless Receiver with integrated relay.
- Wireless Surface Mount Switch including battery.
- A Wiring Guide and Installation Instructions.
Installation
Installing the Surface Mount Switch Kit is a breeze. Just install the receiver unit (controls the lights using an internal relay) in accordance with your wiring setup – check the resources tab – then place the Surface Mount Switch anywhere within range inside your home. Pull the battery tab isolator to start using the wireless switch.
Quick tip: If you already have one existing physical switch and wish to use this kit to add an additional switch to your room, you only require a 1-switch kit. See how here.
If you opt to use the receiver as a standalone unit, it should be wired directly to the electrical load, like your lights, and the power source. This setup allows you to control the electrical load using only the wireless switch modules.
Setup
The Surface Mount Switch Kit is user-friendly and easy to set up. It does not require Wi-Fi, and the transmitter and receiver come pre-paired for your convenience. Follow the provided wiring diagram, and you'll have everything ready straight out of the box.
Multi-way Switching
Order multiple switches in a kit for the ease of multi-way switching. Control your lights from multiple points in the room or multiple points in your home. It's perfect for maximising convenience inside a room. Or for managing outdoor lighting and shared corridors.
Wireless Range
The kit's wireless range, tested in timber-framed homes, has demonstrated impressive reach, managing to operate through two interior walls and up to 15 meters indoors. We believe in presenting real-world performance, not just inflated manufacturer claims.
Battery Life
One of the key features of our wireless product is its impressive battery life. The switch module utilizes a 2.4GHz transceiver with ultra-low power consumption. This leads to an effective battery life that lasts approximately as long as the shelf life of the battery — around seven years. You can count on our wireless switching kit for long-lasting performance without the need for frequent battery replacements.
Interference
The risk of interference from other 2.4GHz equipment is minimal with our wireless switching kit. The switch module employs frequency hopping technology to minimise interference, ensuring a reliable signal. Plus, each kit is digitally paired, allowing you to use multiple kits in close proximity without any interference.
The GEM Surface Mount Switch Kit is designed and assembled in New Zealand. The product complies with the relevant AS/NZS standards and is fit for sale in Australia and New Zealand. All GEM products have a 2 year replacement warranty.
Easy install
Great product. Definitely going to use again.
The way it works is great, simple and reliable.
However the units are very hard to fit in most boxes behind a switch. Especially it it’s a multi switch, then it’s often impossible.
Received switch and installed with no problems, working well as a two way switch.
Like lots of us, we live in an older home - some parts from the 50's. Wiring was scarce and power points were equally sparse. This little item makes it a snap to run power to where you need it and then switch from wherever you want, without running additional wiring. Works great and simple to install. Great service and communication too.