Specify the number of switches you require, e.g. two for 2-way control
Switches
Quantity
-
Description
-
Tech Specs
-
Resources
Just like our completely remote switch module kit but with a mains power connection.
This kit is typically used where you have power available at the point you desire a switch to be, but where no switching cable exists.
To use this kit, connect a toggle switch mechanism to the sense pins and a mains supply to the transmitter. On each flick of the switch, a signal is cast to the receiver which will turn the lighting circuit on/off.
Quick tip: If you already have one existing physical switch and wish to use this kit to add an additional switch to your room, you only require a 1-transmitter kit. See how here.
Contents:
Wireless Receiver
Mains powered Switch Module(s)
Tech Specs | |
Voltage | 100-250VAC 50Hz |
Maximum Load | 500W |
Receiver Dimensions | 73mm x 43mm x 26mm |
Transmitter Dimensions | 73mm x 43mm x 26mm |
Wireless Range | 300 meters (915 MHz) |
Transmitter | 100-250VAC 50Hz |