Express International Shipping - $9.99
Express International Shipping - $9.99
Cart 0

Sold out

Switches

Specify the number of switch modules you require, e.g. two for 2-way control

Quantity


This kit enables the control of lighting, fans, and other loads without needing a switch wire. Just connect the switch module to a conventional switch mechanism and wire in the receiver to the load. The transmitters are digitally paired to the receiver which can switch loads up to 500 watts. The load is toggled each time the switch operates allowing for 2-way, 3-way or higher configurations. The receiver fits comfortably in wall or ceiling spaces and can be wired in with an existing light switch.

Wireless Switch Module Kit for use with a conventional switch mechanism (sold by 3rd party wholesalers, Clipsal, HPM etc). Kit comes with a Wireless Switch Module (transmitter) and Lighting Controller (receiver). All switches in this pack will only operate the included controller. No pairing or programming is necessary.

Quick tip: If you already have one existing physical switch and wish to use this kit to add an additional switch to your room, you only require a 1-transmitter kit. See how here.

Quick Install Instructions:

  1. Connect the Wireless Switch Controller to a string of lights (usually in wall space or ceiling cavity).
  2. Install any of the GEM Wireless Switches to operate.

For home automation features, take a look at our automation kit.

Contents:
Wireless Switch Controller
Wireless Switch Module(es) (AAAA batteries included)

*New controller is smaller than one shown in video above (see specs)

Tech Specs
Voltage 100-250VAC 50Hz
Maximum Load 500W
Receiver Dimensions 73mm x 43mm x 26mm
Module Dimensions 59mm x 20mm x 18mm
Wireless Range 20 meters (2.4GHz)
Battery Life 5 years (AAAA)

Customer Reviews

Based on 7 reviews
86%
(6)
14%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Mark D.
Fan control with Gem switch module

Never used these before but really simple & straight forward.
Installed a heat transfer fan in the roof plugged into a power point. Needed a wall switch in a convenient place so the fan wasn’t running all of the time.
Limited roof space made wiring a new switch where we wanted it really difficult.
Instead added the Gem module at the power point for the fan and changed an existing light switch to a 2 gang and connected the Gem transmitter to the second switch.
Really tidy solution.

A
Andrew M.
Perfect for a Lockwood house

Just installed one in a Lockwood house where there is no way of getting a cable down the wall (no cavity!). Simple and easy fix, and totally transparent as can use the same switch plates as the rest of the house

J
James W.
Great

Works great. Very happy with its functionality and ease of install. Would have liked a permanent supply instead of aa’s as the remote was installed at an existing switch location.

S
Sam L.
Wireless switch

Quick delivery, easy to install, works like a charm. Sam - Tui Electrical Waikato Ltd.

P
Phil g.

Works well, just ordered my second one!